Pioneer DJ PLX-500 Direct drive turntable White
Kör Vinyl!
PLX-500 ärar uppställningen av PLX-1000 professionella skivspelare och producerar ett varmt, klart analogt ljud. Det här är den perfekta däcken om du vill börja spela med vinyl eller om du bara vill lyssna på din skivsamling i ditt hem.
Solitt byggd med utmärkt vibrationsdämpning och exakt ljuduppspelning har detta högmomentdäck en USB-utgång så att du kan göra digitala inspelningar av din vinylsamling i Pioneers gratis rekordbox-programvara. Du kan också kombinera PLX-500 med rekordboxen dvs Plus Pack, en kompatibel mixer och RB-VS1-K Control Vinyl för att spela och scratcha med digitala filer.
Utmärkt ljuddesign
Precis som PLX-1000, är PLX-500 byggd för att producera ett högkvalitativt vinylljud. Den kortaste möjliga ljuddirigeringen från nålen till utgångarna minskar distorsionen, medan telefon / linjeutgångsomkopplaren låter dig ansluta direkt till ditt ljudsystem eller till högtalare utan att behöva en extern förstärkare.
Enkel digital inspelning
Spela in din vinylsamling till högkvalitativa digitala filer genom att helt enkelt ansluta skivspelaren till din PC eller Mac via USB-uttaget.
Smidig DJ-spelning
Använd PLX-500 för att blanda och scratcha dina vinylskivor eller kombinera skivspelaren med rekordbox dvs en kompatibel DJ-mixer och RB-VS1-K Control Vinyl för att lira med dina digitala filer.
Skivomslagsvisning
Sätt dina skivfodral på skärmen medan du lyssnar på din vinyl tack vare hållaren i skivspelarlocket.
Välj din färg
PLX-500 finns i svart eller vitt för att matcha färgen på resten av din utrustning eller inredningen i ditt hem.
Skivspelaren utanför boxen
Den här skivspelaren levereras med alla tillbehör du behöver för att komma igång: ett dammskydd med jackstativ, en slipmat och en silverhöjd PC-HS01-S-hålhölje (patron och pennficka medföljer).
45 rpm
78 rpm
USB-B
Line: 150 mV&1 kHz
The power does not turn on.
1. Is the power cord connected correctly? Connect the power cord to a power outlet. Refer to “Connections” in the Operating Instructions for details.
2. Is the [POWER] switch set to [ON]? Set the [POWER] switch to [ON].
There is no sound, or the volume is very low.
1. Are the audio cables connected correctly? Set the PHONO/LINE switches correctly to match the input terminals to which devices are connected. Refer to “Connections” in the Operating Instructions for details.
2. Are the terminals or plugs dirty? Wipe off the dirt from the terminals and plugs before connecting them. Wipe off the dirt from the headshell and tone arm connection points before connecting.
3. Is the headshell attached correctly? Connect the headshell correctly. Refer to “Before you start” in the Operating Instructions for details.
The needle skips when I perform scratching.
Possible reasons could be as follows.
1. The tone arm and cartridge are not connected correctly.
- Refer to the Operating Instructions for information on how to connect.
2. The tone arm and needle pressure are not adjusted correctly.
- Refer to the adjustment methods detailed in the Operating Instructions, and adjust the settings so that they are appropriate to the needle being used.
3. The record is dirty, scratched, or worn.
- Clean records with a dedicated cleaner, and use records that are in good condition as much as possible.
4. The tip of the needle is worn or broken.
- Replace the needle with a new one.
5. The product is inclined.
- To the extent possible, use the product in a horizontal location where it is not affected by external vibrations.
Additionally, the insulators can be turned to make minor adjustments to move the unit to the horizontal.
The tone arm moves, even though anti-skating is set to 0.
This is the efficiency of this unit. When adjusting needle pressure, adjust positioning so that the tone arm is balanced when still.
The TEMPO slider value does not match the actual rotation speed.
The TEMPO slider value is approximate. Please use it as a guide when adjusting the tempo.
I cannot record in rekordbox.
Please check the following.
(1) Is “USB REC” displayed in the recording source selection window of the rekordbox REC panel?
If not displayed: The computer has not recognized the device. Check if the USB cable is connected correctly to the computer.
(2) When playing a record, does the level meter on the rekordbox REC panel move?
If the level meter does not operate, or if the meter does not move: The recording level may be set low. Use the recording adjustment knob to set an appropriate recording level.
Strobe pattern does not stop even when the TEMPO slider is set to 0 when playing at 45 rpm.
The pattern display due to the strobe illuminator is an approximate display. For a 50 Hz power supply, and when set to 45 rpm, the pattern does not stop completely. This is in accordance with product specifications.
The volume is high (distortion)
Is the audio cable connected correctly? Set the PHONO/LINE switch to match the input terminals that devices are connected. Refer to “Connections” in the Operating Instructions for details.
Noise is generated in output sound
If a USB cable and audio cable from the unit are each used to connect to a different peripheral device and then those two peripheral devices are additionally connected together with a USB cable or other cable, noise may be generated in the output sound because the cables will form a loop.
In that case, disconnect any cable that is unnecessary depending on the purpose.